Welcome!

Search results for 'garmin gpsmap 66st 010 01918 12 0753759188245'

Set Ascending Direction

    • 1¼ "/ T-2 eyepiece with fine focus (5mm focus travel)
    • With three eyepiece clamping screws for fine centering - as well as rotation locking screw to secure the exact focus position
    • Telescope side with T-2 internal thread
    • For 1¼" eyepieces or connecters

    • T-2/90 ° diagonal prism (BaK4 glass) with 35mm free aperture terminal objective side: 2 "or 1¼"
    • Connection eyepiece: 1¼ "
    • Prism made in accordance to Zeiss-norms, multi-coated, solid metal case, both sides T-2 connection threads, resulting in extremely short design and adaptable to each telescope system.
    • Not just the housing is significantly better and the prism is greater, also the planarity and the conformality of the prism faces are about 5x better than standard prisms in plastic housings.

      OUT OF STOCK  

  1. Off Axis Guider (BFM-OAG) for direct connection to the Baader FlipMirror II Star Diagonal

    • Coma Corrector for Newton telescopes, that neither does reduce the focal length nor the image field of your telescope
    • 46 mm clear lens diameter in M48 mode – enables exposures free from vignetting
    • designed for fast f-ratios up to f / 3.5. Maximum sharpness across the entire image field
    • Phantom Coating™ Group, multicoated for maximum transmission and total freedom from reflections

    • Visual & Photographic Version consisting of:
      • 2" Multi-Purpose Coma Correktor (MPCC) Mark III photographic #2458400A
      • Baader Focusing Eyepiece Holder 1¼" / T-2 (T-2 part #08A) (#2458125)
      • Baader VariLock 29, lockable T-2 ExtensionTube 20-29mm with spanner tool (T-2 part #25Y) (#2956929)
      • Baader Hyperion 2" Finetuning Stopring with brass clamping ring & 2 thumb screws (#2958027)

    • Laser-Collimator for easy collimation of your telescope in 1-2 minutes
    • High-quality, impact-resistant and highly accurate laser, with concealed setscrews
    • Precision-machined, hard-anodized barrel instead of the less accurate 1¼" chrome barrel
    • Handle protector made of silicone rubber facilitates handling with gloves
    • Suitable for Newton and SC telescopes, instructions included

    • Safe solar observation! 100% UV-protection, 100% IR-protection, sun light intensity reduced by 99,999%
    • Our Solar Viewer AstroSolar® Silver/Gold – MADE IN GERMANY – safely protect your eyes for visual solar observation. This is THE solution to see the partial phase of Solar Eclipses or even big sunspots with your own eyes!
    • Consists of Baader AstroSolar® Silver/Gold Film, with eye-sided reflex-free viewing. Also blocks IR, thus no unpleasant feeling of warmth in the eyeball. Optical Density OD=5,0 
    • CE / ISO certified: conforms to and meets the transmission requirements for eye safety: EN ISO 12312-2:2015 – Instructions in four languages (English, German, French, Spanish) on the inner side of the solar viewer

      OUT OF STOCK  

    • Blocks UV below 400nm and IR above 680nm
    • Maximum transmission, scratchproof hard coated
    • non-ageing sealed coating edges

    • High-quality lense system with apochromatic features, for magnifications from 2x
    • Modular design for visual and photographic (VIP) use
    • suitable for 1¼" and 2" focusers

    • 2" ClickLock Diagonal Mirror
    • Oversized 2 "dielectric lamda / 10 levels with 112mm optical length
    • Mirror repels UV and IR radiation, provides high security at the solar observation in white light and with Ha-sun filters
    • Scratch-resistant, hard-coated mirror surface for safe cleaning, scratch-resistant even in extreme conditions
    • Baader 2" ClickLock clamp for ultrafast clamping action
    • Removable 2" Safety Kerf nosepiece

      OUT OF STOCK  

    • Containing: T-2/32 Diagonal with focusing 1¼" eyepiece clamp (#2458125) and 1¼" nose piece (#2458105)
    • Connection objective side: T-2 internal thread 1¼ "barrel
    • Connection eyepiece: T-2 external thread and focusable 1¼ "eyepiece
    • Excellent for Baader Maxbright binoviewer

    • Full field sharpness: The sharp flat 76° field is unsurpassed by any other modern wide field eyepiece. On-axis sharpness and contrast rivals our best planetary eyepieces, while delivering nearly equivalent performance over the full field.
    • Long Eye Relief and optimized for bino-viewing: Morpheus pushes the envelope of comfortable wide field viewing further than ever before, delivering close to 20mm of eye relief
    • Low Distortion: The Morpheus optical design delivers exceedingly low distortion (angular magnification distortion)
    • Photo-Video Adaption: Like their Hyperion siblings, all Morpheus eyepieces make superb imaging projection optics with the M43 thread

  2. Hyperion Zoom Mark IV is the fourth generation of Baader Zoom eyepieces, offering great image quality, 68° wide field of view and the improved Clickstop Action that clearly defines the position of 5 focal lengths (8, 12, 16, 20 and 24mm), a must for effortless binoviewing.

Set Ascending Direction