Welcome!

Search results for 'crosscall floating case action x3 fc bo ax3 gr 3700764706220'

Set Ascending Direction
Page:
  1. 1
  2. 2

  1. 5/8 λ ground plane omnidirectional 26 to 28 MHz Tunable Antenna. Height (approx): 6700 mm / 21.98 ft.
    Additional nylon ring to reduce the wind noise of the radials included.

  2. The KM-3F is an antenna designed specifically for sailing boats, and combines lightness and flexibility with extreme resistance to atmospheric agents. Sober and elegant design. The antenna is supplied together with the stainless steel mounting bracket, 20 meter RG-58cable and 2 PL connectors.

  3. The KM-3F is an antenna designed specifically for sailing boats, and combines lightness and flexibility with extreme resistance to atmospheric agents. Sober and elegant design. The antenna is supplied together with the stainless steel mounting bracket, which guarantees a quick and safe installation on the mast.

  4. A very compact antenna for the 4m band. With the design with Moxon elements as radiators we achieve several benefits like for example the very short boom length, an excellent front/back ratio of more than 30 dB and a large bandwidth. An other benefit is the 50 Ω design, which let's u s avoid the use of a lossy balun as transforming element, the feed line is connected directly to the radiator. Only one feed line is required for both bands. The small weight of only 3 kg makes this antenna also suitable for vacations and DX-peditions. Packing size only 153 x 10 x 10cm.

  5. Parabolic antenna for IC-905 and CX-10G. Splash plate feed antenna

  6. The Z-100PLUS is an automatic antenna tuner useable for 1.8 to 54 MHz, for any transceiver with 0.1 to 125 Watt power SSB/CW (100W FM, 30W on 6m). The tuner is suitable for any unsymmetrically fed antenna (i.e. Beams, Dipoles, Groundplanes etc.). If the matching range is not sufficient, a 4:1 balun (symmetrical) or a MTFT balun (unsymmetrical) can be used (not included).

  7. Ground less independent 26-28Mhz antenna. No tuning required. Height (approx): 1140 mm / 3.74 ft

  8. The Yaesu G-450 Light/Medium-Duty Rotator is a versatile equipment designed with specific technical specifications. With a wind load capacity of 1m², a stationary torque of 3000kg/cm, and a rotation torque of 600kg/cm, this rotator is suitable for various applications. The motor has been upgraded to DC from AC, enhancing its performance and efficiency.

  9. Mobile CB Antenna 4 meter cable included

  10. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.

    A built-in ZOOM capability makes graphical measurements especially effective.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

    • Frequency range: 0.1 to 1500 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
    • SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode
    • R and X range: 0…2000, -2000…2000

      OUT OF STOCK  

  11. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
    A built-in ZOOM capability makes graphical measurements especially effective.
    An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

  12. 27MHz CB antenna PL version - 840mm

      OUT OF STOCK  

  13. 27MHz CB Citizen-Band Mobile Antenna 1150mm. PL version

      OUT OF STOCK  

  14. 27MHz CB Citizen-Band Mobile Antenna 1150mm

  15. The KS-21 is the perfect antenna for small boats and RIBs. With only 100 cm length it guarantees the same performance of a 150 cm length VHF antenna. It’s built with a 1,4 mm thick fiberglass whip that gets fully foam injected with the special Scout 100% waterproof technique, and it’s ice white colored with high gloss anti-UV filter to prevent color deterioration.

  16. CB Antenna Suitable For Balcon And Temporary Installation - 3.6 meters - 300W

  17. The SX400 measures forward and reflected power and VSWR. Compact size makes meter useful for testing both base and mobile installations. PL connections.

      OUT OF STOCK  

Set Ascending Direction
Page:
  1. 1
  2. 2