RigExpert Shackmaster OSL Kit
€ 99.00Compact and accurate 3-in-1 OSL (Open, Short, Load) calibration kit for radio amateurs. It is also ideal for lab equipment, telecom
RigExpert Zero II Antenna Analyzer
€ 119.00Powerful VNA antenna analyzer up to 1GHz for embedded installation
Inserted directly into the antenna feedline, measures antenna current in three calibrated ranges. Use the RF current meters for precise measurements of antenna currents, while tuning your amplifier or tuner, calculate the impedance of your antenna feedpoint. Highly suitable for experiments with antennas or monitor changes of the antenna during operation.
The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible ZOOM capability.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
It is the world’s first antenna analyzer capable of 16 hours of continuous measurements without battery recharging.
Small, handy and powerful vector network analyzer is designed for measuring most useful parameters of cable and antenna systems in the range of 100 kHz to 230 MHz. Compared with the other devices the Stick is the State-of-the-Art Antenna & Cable Analyzer. Because it has Key benefits: less size you obtain, less weight you carry, less time you measure.
Vector Impedance Antenna Analyzer - 0.5/60MHzOUT OF STOCK
The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
RigExpert Stick 500
€ 399.00Antenna Analyzer Stick 500 became the third member of the Stick family that is well known to connoisseurs of high technology and the incredible comfort of using. No matter the time, place, or weather. Range: from 0.1 to 500MHz
The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
RigExpert Stick Pro
€ 439.00Stick Pro is an antenna and cable vector analyzer. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many others in the frequency range from 100 kHz to 600 MHz.
RigExpert Stick XPro
€ 679.00Stick XPro is a vector antenna analyzer that simply and accurately measures all the main parameters of various RF devices and systems in the frequency range from 0.1 MHz to 1000 MHz.
- Frequency range: 0.1 to 650 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
- SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
- R and X range: 0…2000, -2000…2000
- Frequency range: 0.1 to 1500 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
- SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode
- R and X range: 0…2000, -2000…2000
OUT OF STOCK
- Frequency range: 0.1 to 2000 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm systems
- SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
- R and X range: 0…2000, -2000…2000
RigExpert AA-3000 ZOOM
€ 1,439.00Antenna Analyzer with a frequency range from 0.1 to 3000 MHz. Perfect for amateur, professional, and commercial radio.
