RigExpert AA-3000 ZOOM
€ 1,439.00Antenna Analyzer with a frequency range from 0.1 to 3000 MHz. Perfect for amateur, professional, and commercial radio.
- Frequency range: 0.1 to 2000 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm systems
- SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
- R and X range: 0…2000, -2000…2000
- Frequency range: 0.1 to 1500 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
- SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode
- R and X range: 0…2000, -2000…2000
OUT OF STOCK
- Frequency range: 0.1 to 650 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
- SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
- R and X range: 0…2000, -2000…2000
RigExpert Stick XPro
€ 679.00Stick XPro is a vector antenna analyzer that simply and accurately measures all the main parameters of various RF devices and systems in the frequency range from 0.1 MHz to 1000 MHz.- -19%
Icom AH-730 Antenna Tuner 1.8-54 MHz
Regular Price: € 589.00
€ 479.00
HF/6 m automatic antenna tuner, especially for matching wire or vehicle antennas on short wave. Peak power 150 W, continuous power 100W. Suitable for all Icom radios with 4-pole tuner socket. 
RigExpert Stick Pro
€ 439.00Stick Pro is an antenna and cable vector analyzer. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many others in the frequency range from 100 kHz to 600 MHz.
The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
RigExpert Stick 500
€ 399.00Antenna Analyzer Stick 500 became the third member of the Stick family that is well known to connoisseurs of high technology and the incredible comfort of using. No matter the time, place, or weather. Range: from 0.1 to 500MHz
Vector Impedance Antenna Analyzer - 0.5/60MHzOUT OF STOCK
The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
Icom AH-705 Antenna Tuner
€ 359.00Automatic antenna tuner specifically designed for IC-705
Reads SWR, forward and reflected power digitally in a single glance. 1.5-525 MHz, HF/VHF switch, 200 Watts.
The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
It is the world’s first antenna analyzer capable of 16 hours of continuous measurements without battery recharging.
Small, handy and powerful vector network analyzer is designed for measuring most useful parameters of cable and antenna systems in the range of 100 kHz to 230 MHz. Compared with the other devices the Stick is the State-of-the-Art Antenna & Cable Analyzer. Because it has Key benefits: less size you obtain, less weight you carry, less time you measure.
The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible ZOOM capability.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
LDG KT-100 Auto Tuner
€ 259.00The LDG KT-100 is an automatic tuner intended for use with modern Kenwood transceivers. It works with any Kenwood transceiver that supports the AT-300 Kenwood tuner (no longer available). A partial list of compatible units includes: TS-2000, 50, 450, 480SAT (not HX), 570, 590, 850, 870, 990 (and all variants). The interface cable is included.
LDG Z-100PLUS Antenna Tuner 125W
€ 239.00The Z-100PLUS is an automatic antenna tuner useable for 1.8 to 54 MHz, for any transceiver with 0.1 to 125 Watt power SSB/CW (100W FM, 30W on 6m). The tuner is suitable for any unsymmetrically fed antenna (i.e. Beams, Dipoles, Groundplanes etc.). If the matching range is not sufficient, a 4:1 balun (symmetrical) or a MTFT balun (unsymmetrical) can be used (not included).
Filter
- Category
- Antenna analyzers (14)
- Rosmeter/Wattmeter (9)
- Antenna Tuners (6)
- Brand
- price
- € 0.00 - € 999.99 (27)
- € 1,000.00 and above (2)
