- A very compact antenna for the 4m band. With the design with Moxon elements as radiators we achieve several benefits like for example the very short boom length, an excellent front/back ratio of more than 30 dB and a large bandwidth. An other benefit is the 50 Ω design, which let's u s avoid the use of a lossy balun as transforming element, the feed line is connected directly to the radiator. Only one feed line is required for both bands. The small weight of only 3 kg makes this antenna also suitable for vacations and DX-peditions. Packing size only 153 x 10 x 10cm.
Standard Horizon SCU-31 GPS Antenna
€ 159.00The Standard Horizon SCU-31 is a NMEA 0183 Smart Antenna that provides rapid acquisition time and NMEA output.
Can also be used as a replacement antenna for the older CP180 and CP300 chart plotters.- 140-160MHz Wide band antenna, Highly Symmetrical Radiation Pattern
5/8 High gain CB base antenna
New 2024 version improved with the application of a sleeve in PA6 plastic material reinforced with glass fiber fixed by a pair of steel clamps. By using this sleeve, excellent mechanical resistance to stress is obtained.Innovative Komunica HF-PRO-2-PLUS-T portable Wide Spectrum antenna:
7 / 30MHz + 50MHz + 3.5MHz (via included coil) + VHF
Maximum robustness, super-light and ultra-compact size, measuring 29cm disassembled and 270cm maximum extension.
Ideal QRP, SOTA, etc. by telescopic tripod, magnetic base reinforced, etc (see Komunica accessories: TRIPOD-KIT & TRIPLE-MAG, etc).
OUT OF STOCK
5/8 λ ground plane omnidirectional 26 to 28 MHz Tunable Antenna. Height (approx): 6700 mm / 21.98 ft.
Additional nylon ring to reduce the wind noise of the radials included.- Base antenna for 50MHz/VHF/UHF - 242cm.
- The SX1100 measures forward and reflected power and VSWR. Compact size makes meter useful for testing both base and mobile installations. Two directional couplers with switch and LED indicators for in-line connection of two transceivers.
OUT OF STOCK
LDG Z-100PLUS Antenna Tuner 125W
€ 239.00The Z-100PLUS is an automatic antenna tuner useable for 1.8 to 54 MHz, for any transceiver with 0.1 to 125 Watt power SSB/CW (100W FM, 30W on 6m). The tuner is suitable for any unsymmetrically fed antenna (i.e. Beams, Dipoles, Groundplanes etc.). If the matching range is not sufficient, a 4:1 balun (symmetrical) or a MTFT balun (unsymmetrical) can be used (not included).LDG KT-100 Auto Tuner
€ 259.00The LDG KT-100 is an automatic tuner intended for use with modern Kenwood transceivers. It works with any Kenwood transceiver that supports the AT-300 Kenwood tuner (no longer available). A partial list of compatible units includes: TS-2000, 50, 450, 480SAT (not HX), 570, 590, 850, 870, 990 (and all variants). The interface cable is included.The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible ZOOM capability.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
Icom AH-24 Collinear Antenna 2.4GHz
€ 319.00Collinear antenna for IC-905. Horizontal plane omnidirectional antennaIcom AH-56 Collinear Antenna 5GHz
€ 319.00Collinear antenna 5GHz for IC-905. Horizontal plane omnidirectional antennaIcom AH-100 Collinear Antenna 10GHz
€ 329.00Collinear antenna 10GHz for IC-905 and/or CX-10G. Horizontal plane omnidirectional antennaAlpha HF Magnetic Loop Antenna
Operating range: 7-30MHz
Diameter: 26.5″
Maximum applicable power: 20W
Connector: PL-259
It can be comfortably housed and carried with the LC-192 backpackThe analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
It is the world’s first antenna analyzer capable of 16 hours of continuous measurements without battery recharging.
Small, handy and powerful vector network analyzer is designed for measuring most useful parameters of cable and antenna systems in the range of 100 kHz to 230 MHz. Compared with the other devices the Stick is the State-of-the-Art Antenna & Cable Analyzer. Because it has Key benefits: less size you obtain, less weight you carry, less time you measure.