The Commandmic HM-195, equipped with a large display, speaker 45mm and multifunction keypad, lets you monitor the VHF equipment from any remote location of the boat. The IC-M400BB also has the function of "active noise cancellation." This feature significantly reduces background noise, ensuring clear communication and excellent quality.

Protection Class: IPX-7 (both the black box that the HM-195)
AquaQuake Function (HM-195)
Audio Power: 2 watts (HM-195)
PA function (10W)
DSC Class D
Possibility to connect an 'external speaker
Function dual / tri watch
NMEA 0183 interface
Space-Saving, Two-Piece Configuration
The IC-M400BB consists of a two-piece, black box confi guration. The RF unit, IC-M400BB, can be installed in an out-of-sight place and the COMMANDMIC., HM-195B/SW, provides full function control from up to 18.3m (60ft) away from the RF unit.

New Intuitive User Interface
The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right keys.

Active Noise Cancelling (ANC)
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.

10W Loud Audio, Public Address and Foghorn
The IC-M400BB has a built-in 10W amplifi er that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.

Built-in Class D DSC
The IC-M400BB meets the latest Class D regulation (ITU-R M493-13 and EN 300 338-3). The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC "Distress" button on the back of the COMMANDMIC.,
HM-195B/SW. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

NMEA 0183 Input/Output for Common GPS/NAV Interface
When connected to an external GPS receiver, current position and time are shown on the Commandmic display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.

AIS Target Call with MA-500TR
The IC-M400BB can be integrated with the MA-500TR Class B AIS Transponder allowing
you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry.

MarineCommander. Compatible
When connected to the MarineCommander, the received DSC message pops up on the multi-function display.

IPX7 Waterproof Protection
The IC-M400BB and HM-195B/SW withstand submersion in up to 1.0m depth of water for 30 minutes.

Favorite Channel Function
The favorite channel function allows you efficient scanning and quick channel selection. Set the favorite channel to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels are selected, while unmarked channels are skipped. Normal and priority scan searches active channels from the favorite channels.

Other Features

- AquaQuake. water draining function for HM-195B/SW
- Dual/tri-watch function for monitoring Ch.16 and/or call channel
- LCD and keypad backlighting (HM-195B/SW)
- Usable channels: INT