Website for deliveries in USA and Canada. Welcome!

Coma correctors

Set Descending Direction

    • Coma Corrector for Newton telescopes, that neither does reduce the focal length nor the image field of your telescope
    • 46 mm clear lens diameter in M48 mode – enables exposures free from vignetting
    • designed for fast f-ratios up to f / 3.5. Maximum sharpness across the entire image field
    • Phantom Coating™ Group, multicoated for maximum transmission and total freedom from reflections

    • Visual & Photographic Version consisting of:
      • 2" Multi-Purpose Coma Correktor (MPCC) Mark III photographic #2458400A
      • Baader Focusing Eyepiece Holder 1¼" / T-2 (T-2 part #08A) (#2458125)
      • Baader VariLock 29, lockable T-2 ExtensionTube 20-29mm with spanner tool (T-2 part #25Y) (#2956929)
      • Baader Hyperion 2" Finetuning Stopring with brass clamping ring & 2 thumb screws (#2958027)

  1. Visual / photographic coma corrector with 50,8mm graft for Newtonian telescopes. Adaptable to all Newton Skywatcher f / 5 with Crayford or Dual Focuser 2 focuser. For the photographic use requires the M48 ring

  2. New Coma Tecnosky corrector with 0.95x reduction factor and leveled field for APS-C sensors and up to APS-H (type kodak 16200)

  3. The TS Superflat GPU coma corrector is one of the best correctors for astrophotography through fast Newtonians.

    • 4-element coma corrector for excellent imaging in the field and on the axis.
    • Designed by Gyulai Pal in Hungary (GPU-Optics)
    • Perfectly suitable for Newtonian telescopes with focal ratios of f/4 - provides very good results from f/3.5 to f/6.
    • Very tolerant against tilting.
    • Focal length is not changed.
    • Camera connection through M48 thread.
    • For better stability and accuracs, the corrector can be screwed to the focuser. Connection adapters for cameras and focusers are available.

  4. Coma corrector for Newton f/4 Quattro telescopes. Requires the M48 photo ring.

Set Descending Direction