The 2" CCD compressor reduces the focal length of telescopes with the factor 0.67x, thus allowing significantly shorter exposure times.

• ♦ The focal reducer is perfectly suitable for RC telescope. It also works good with Celestron EHD or Meade ACF telescopes or with refractors up to the focal ratio F/9
• ♦ The image field of DSLR cameras up to APS-C format is illuminated - full illumination up to 29 mm
• ♦ Easy connection to the telescope via 2" barrel
• ♦ Optimal working distance from the M48x0.75 thread to the camera sensor is 85 mm - enough space for accessories like off-axis guider or filter wheel
• ♦ 2" filter thread at the telescope side

The adapter allows connecting 2" accessories to adapters, correctors and focusers with male M48x0.75 thread

• Telescope-sided connection: M48x0.75 thread (female)
• Eyepiece-sided connection: 2" receptacle (female)
• Length: 40 mm
• Locking via 2 knurled screws and brass compression ring

High-quality 2" focuser for astrophotography and visual observation with Ritchey-Chrétien telescopes - holds acessories up to 6 kg.

• Oversized ball bearings and V2A stainless steel bearing surface for maximal load with smooth adjustment
• 2" and 1.25" clamping by brass compression ring
• D=65 mm connection thread for threaded adaptions for astrophotography
• Dual speed with gear wheel for motor focus - friction cluth integrated - motor focus is optional
• Trouble-free adaption to TS-Optics, GSO, AstroTec.. RC telescopes via the M90x1 connection thread (female) at the telescope side
• Minimal height with base is 91 mm
• Drawtube travel is 30 mm
• Motorized focusing is possible - see optional accessories

The extension tube extends an adapter with M48x0.75 thread by 20 mm.

• barrel made of metal
• black anodized
• double sided 2" filter thread (M48x0.75) - male/female
• optical path is 20 mm
• the outer diameter of the adapter is is exactly 2" - fits into the 2" receptacle of focusers or adapters

The extension tube extends an adapter with M48x0.75 thread by 15 mm.

• barrel made of metal
• black anodized
• double sided 2" filter thread (M48x0.75) - male/female
• optical path is 15 mm
• the outer diameter of the adapter is is exactly 2" - fits into the 2" receptacle of focusers or adapters

The extension tube extends an adapter with M48x0.75 thread by 10 mm.

• barrel made of metal
• black anodized
• double sided 2" filter thread (M48x0.75) - male/female
• optical path is 10 mm
• the outer diameter of the adapter is is exactly 2" - fits into the 2" receptacle of focusers or adapters

The extension tube extends an adapter with M48x0.75 thread by 30 mm.

• barrel made of metal
• black anodized
• double sided 2" filter thread (M48x0.75) - male/female
• optical path is 30 mm
• the outer diameter of the adapter is is exactly 2" - fits into the 2" receptacle of focusers or adapters

The extension tube extends an adapter with M48x0.75 thread by 5 mm.

• barrel made of metal
• black anodized
• double sided 2" filter thread (M48x0.75) - male/female
• optical path is 5 mm
• the outer diameter of the adapter is is exactly 2" - fits into the 2" receptacle of focusers or adapters

The extension tube extends an adapter with M48x0.75 thread by 3 mm.

• barrel made of metal
• black anodized
• double sided 2" filter thread (M48x0.75) - male/female
• optical path is 3 mm
• the outer diameter of the adapter is is exactly 2" - fits into the 2" receptacle of focusers or adapters

Versatile dovetail bar for telescope attachment to mounts with Losmandy level saddle plate

• Length: 180 mm
• Very solid in spite of its weight of only 434 grams
• Slotted holes, thread bores and countersunk bores allow a wide range of adaptations

This low profile adaptor enables the connection of T2 accessories to adaptors with M48x0,75 male thread.

• Thread towards telescope: M48x0,75 - 2" filter thread (female thread)
• Thread towards camera: T2 - M42x0,75 male thread
• Optical length only 3,5 mm
• Combining the optical extension tube TSVF230 with the TSM48-T2 adaptor provides a Focal Adaptor from 2" to T2 - with no optical length!

The TS Superflat GPU coma corrector is one of the best correctors for astrophotography through fast Newtonians.

• 4-element coma corrector for excellent imaging in the field and on the axis.
• Designed by Gyulai Pal in Hungary (GPU-Optics)
• Perfectly suitable for Newtonian telescopes with focal ratios of f/4 - provides very good results from f/3.5 to f/6.
• Very tolerant against tilting.
• Focal length is not changed.
• Camera connection through M48 thread.
• For better stability and accuracs, the corrector can be screwed to the focuser. Connection adapters for cameras and focusers are available.