TX Frequency: 144/430
RX frequency: 120/144/150/300/430/450/800/900
Gain: -
Maximum power: 10 watts
Height: 21 cm.
Connector: SMA Male

Reads SWR, forward and reflected power digitally in a single glance. 1.5-525 MHz, HF/VHF switch, 200 Watts.

The SX20C is a compact SWR-power meter. Featuring cross needle design for measuring SWR and output power simultaneously. Compact size makes it very useful for testing mobiles as well as base station installation.

Special Features:

• Cross needle design
• Rated from 3.5-30, 50-54, and 130-150 MHz
• Power ranges of 30 & 300 Watts

The SX40C is a compact SWR-power meter. Featuring cross needle design for measuring SWR and output power simultaneously. Compact size makes it very useful for testing mobiles as well as base station installation.

Special Features:
• Cross needle design
• Rated from 144-470 MHz
• Power ranges of 30 & 300 Watts

The DUAL MIKE WIRELESS presents itself as a classical CB microphone, but is much more.
With this compact device you talk and listen without distance limitations, interfacing it with the CB TALK App.
Inside it there is a 3W speaker that turns it into a real "speakerphone" for perfectly safe use while driving.

CT990 is fitted with the Dead Man function, useful when you are on your own or isolated. This function constantly monitors the status of the person wearing the radio: if a change in position of the radio from vertical to horizontal (due to illness or injury) is recorded CT990 emits an alarm that is sent to all users tuned to its frequency.

The KS-21 is the perfect antenna for small boats and RIBs. With only 100 cm length it guarantees the same performance of a 150 cm length VHF antenna. It’s built with a 1,4 mm thick fiberglass whip that gets fully foam injected with the special Scout 100% waterproof technique, and it’s ice white colored with high gloss anti-UV filter to prevent color deterioration.

There’s no need to introduce this classic of marine communication. The antenna that has become a standard for users now meets the excellence of the patent 100% WATERPROOF.

The BC-202IP3L is a new multi-connectable rapid charger for Icom’s range of IP/LTE radios and selected Amateur radio products.
The BC-202IP3L charging pod can not only be used to charge one radio, it can also be connected to form a multi charger with a combination of 2, 3, 4, 5 or 6 pods. By simply sliding off the sides of each pod, you can slot them together in a daisy chain via pin connectors on each charger providing a strong, sturdy product.
The BC-202IP3L allows users to quickly charge the BP-271, BP-272 lithium-ion batteries and the forthcoming BP-307 large high capacity 7.2V / 3350mAh (typ.) li-Ion battery pack. 
The BC-202IP3L can be used with the IP100H, IP501H, IP503H, ID-31E (all versions), ID-51E (all versions), and the new Icom IC-705 QRP SDR transceiver.

The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.

The following tasks are easily accomplished by using this analyzer:

• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
• Making coaxial stubs or measuring their parameters
• Cable testing and fault location, measuring cable loss and characteristic impedance
• Measuring capacitance or inductance of reactive loads

The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.

A built-in ZOOM capability makes graphical measurements especially effective.

The following tasks are easily accomplished by using this analyzer:

• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
• Making coaxial stubs or measuring their parameters
• Cable testing and fault location, measuring cable loss and characteristic impedance
• Measuring capacitance or inductance of reactive loads

The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.

It is the world’s first antenna analyzer capable of 16 hours of continuous measurements without battery recharging.

Small, handy and powerful vector network analyzer is designed for measuring most useful parameters of cable and antenna systems in the range of 100 kHz to 230 MHz. Compared with the other devices the Stick is the State-of-the-Art Antenna & Cable Analyzer. Because it has Key benefits: less size you obtain, less weight you carry, less time you measure.

Midland 88 professional CB radio:

• 12V / 24V power supply
• 40 AM / FM or VFO channels
• TX power 4W
• 4 memories
• TFT color display
• digital squelch
• SWR protection
• 2-channel monitor
• roger beep
• PA function
• 3 brackets (DIN, dashboard, suction cup)
• microphone with channel change