Search results for 'eqmod cable for eq6 heq5 ao eqmod cable n a'
EQMOD cable for SkyWatcher AZGTI mount
US$ 43.58EQMOD cable for AZGTI Skywatcher - Allows you to control your AZGTI mount with ASIAIR PRO, Raspberry Pi 3/4 or PCOUT OF STOCK
SkyWatcher Synscan USB Module
US$ 31.57Allows a more reliable wired connection between any Skywatcher Synscan Go-To mount and a PC and certain Android devices. The dongle plugs into the mount’s hand control port and connects to a computer with a USB cable (not supplied). Users can then control a Skywatcher Go-To telescope from a computer by using either the SynScan Pro application for Windows or third party applications like EQMOD and K-Star. The dongle is supplied with cables that support both alt-azimuth and equatorial Synscan Go-To mounts (except the EQ6 Pro when the mount’s handset cable should be used instead). The dongle can also be used for updating the mount's motor firmware.
* USB cable is not included
Note: Sky-Watcher mounts which have a built-in USB port do not require this dongle.OUT OF STOCK
Yaesu SSM-17B Speaker Mike
US$ 16.90Simple microphone with built-in speaker for Yaesu radios. PTT button on the side, a socket for an earphone is located at the bottom. Spiral cable approx. 40cm long, 2x 2-pin plug. Compatible with: FT-4VE, FT-4XE, FT-25, FT-65Scout KS-7B CB Antenna 1.5m
US$ 42.25There’s no need to introduce this classic of CB marine communication. This antenna has become a standard for professionals, thanks to an excellent quality and an outstanding reliability. The special paint with anti-UV filter avoids the deterioration of the colouring and keeps the whip shining white.
The new vinyl plastic cap, navy blue, provides a quality, finished appearance to the antenna and it’s extremely resistant to high temperatures. 100% WATERPROOF
- 100% WATERPROOF Antenna
- Anti – UV high gloss finish
- 5 m coaxial cable RG 58 CU MIL
Midland MA31 Secure TX
US$ 19.12Speaker mike with curly cable - only PTT, 2 pin Midland plugMidland MA21 Secure TX
US$ 16.90Speaker mike with curly cable only PTT, 2 pin Midland plugIcom OPC-2350LU Data Cable
US$ 57.82Programming and data cable for Icom IC-7100/9700/ID-51/31/5100/4100. Also used to program your radios in terminal modeYaesu CT-162 Separation Cable 6m
US$ 34.256 meters separation cable for FTM-100, FTM-400D, FTM-400XDCable PL plug / PL plug (H-155) - 50cm
US$ 10.2350cm coaxial cable with low attenuation (Low Loss, type H-155), with PL plug to PL plug. Useable up to 6 GHz, typical applications are ham radio, PMR and similar. Impedance: 50 OhmN Plug (10mm cable)
US$ 6.14N Plug for cables of 10mm diameter (Airborne 10, Hyperflex 10, Ultraflex-10, Aircom Premium, Ecoflex-10, Ecoflex-10 Plus, Ecoflex-10 Plus Heatex, Seatex-10, RG-213/UBX)- Controller Extension Cable 3.5m for IC-2730 and ID-5100
- LDG control cable for Yaesu transceivers with "TX Req" input, suitable for various LDG tuners with 3.5mm stereo jack socket (radio). Tuning is done via the "Tune" button on the tuner, this signals the radio via "TX Req" to transmit a low power carrier. Red plug to the transceiver, black plug to the tuner.
RigExpert Stick Pro
US$ 390.48Stick Pro is an antenna and cable vector analyzer. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many others in the frequency range from 100 kHz to 600 MHz.ZWO ASIAir Shutter Cable N1 for Nikon
US$ 10.23Shutter cable for ASIAir compatible with: Nikon D3, D3X, D3S, D4, D4S, D5, D200, D300, D300S, D500, D700, D800, D800E, D810, D810A, D850ZWO ASIAir Shutter Cable N3 for Nikon
US$ 10.23Shutter cable for ASIAir compatible with: Nikon Z6, Z7, D90, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D5500, D5600, D7000, D7100, D7200, D7500, D600, D610, D750, Df, D90 and COOLPIX P7700, COOLPIX P7800, COOLPIX A, COOLPIX P1000Icom CP-12L Cigarette Lighter Cable
US$ 21.80Cigarette lighter cable with noise filter (Right Angle Plug). Fuse 3A