• Baader MaxBright® II Binoviewer with adapters to T-2 and Zeiss micro-bayonet in a padded carrying case
• 27mm prisms with 26 / 25,5mm clear aperture, for all 1,25"-eyepieces – up to focal lengths of 35mm
• Ergonomically designed ClickLock® eyepiece clamps with diopter adjustment
• Baader Astro T-2 System™ connector thread (M 42 x 0.75) and Zeiss micro-bayonet for the shortest possible connection to (almost) all existing telescope systems
• Optical tube length: 110 mm (+/- 1 mm tolerance)
• with special accessories:
• Glasspathcorrector 1:1,70 for Baader-Binoviewer with T-2 thread (MaxBright II® and MaxBright®) (#2456316, € 96,-)
• Baader Nose piece 1¼" / T-2 (T-2 part #14) (#2458105, € 24,-)

Self-centering closure for 1.25" eyepieces, cameras and accessories in general

High-quality 2" focuser for astrophotography and visual observation with Ritchey-Chrétien telescopes - holds acessories up to 6 kg.

• Oversized ball bearings and V2A stainless steel bearing surface for maximal load with smooth adjustment
• 2" and 1.25" clamping by brass compression ring
• D=65 mm connection thread for threaded adaptions for astrophotography
• Dual speed with gear wheel for motor focus - friction cluth integrated - motor focus is optional
• Trouble-free adaption to TS-Optics, GSO, AstroTec.. RC telescopes via the M90x1 connection thread (female) at the telescope side
• Minimal height with base is 91 mm
• Drawtube travel is 30 mm
• Motorized focusing is possible - see optional accessories

• Extended scope of supply: the Morpheus® 76° eyepiece set includes the Hyperion® / Morpheus® eyepiece case (#2454601) as well as the Baader Utility Bag for small accessories (#2954201)
• Full field sharpness: The sharp flat 76° field is unsurpassed by any other modern wide field eyepiece. On-axis sharpness and contrast rivals our best planetary eyepieces, while delivering nearly equivalent performance over the full field.
• Long Eye Relief and optimized for bino-viewing: Morpheus pushes the envelope of comfortable wide field viewing further than ever before, delivering close to 20mm of eye relief
• Low Distortion: The Morpheus optical design delivers exceedingly low distortion (angular magnification distortion)
• Photo-Video Adaption: Like their Hyperion siblings, all Morpheus eyepieces make superb imaging projection optics with the M43 thread

Using a new large aperture lens and CMOS, under the same ambient brightness, the exposure time of the OCAL3.0 electronic collimator is only 1/20 of that of the second-generation electronic collimator. If the light source is too strong, it is recommended to reduce the gain rather than simply reducing the exposure time. Now, new collimators can adjust the telescope's collimation in darker environments.

The clarity of the OCAL3.0 electronic collimator image has been greatly improved. Now you can see clearer primary mirror marks and more reflection information, and it still performs well when equipped with a correction mirror. 

The TSRCKOLLI collimator was developed for Ritchey-Chrétien telescopes, but also for all other types of telescopes, like refractor, Newtonian or SC Cassegrains - made in Europe

• The corrector allows the collimation of almost all optical systems with high accuracy.
• Suitable for all 2" receptacle with precice 2" barrel to avoid tilting
• LEDs are powered by 2 normal 1.5V AA batteries (batteries are not included)
• We recommend the collimator mainly for RC telescopes, Cassegrains and Schmidt Cassegrains as long as they have a center mark on their secondary mirror. So a top collimation state of the telescope can be reached even at daylight.

• 1¼ "/ T-2 eyepiece with fine focus (5mm focus travel)
• With three eyepiece clamping screws for fine centering - as well as rotation locking screw to secure the exact focus position
• Telescope side with T-2 internal thread
• For 1¼" eyepieces or connecters