Website for deliveries in USA and Canada. Welcome!

Search results for 'de comms accessories power-supplies batteries'

Set Descending Direction

  1. Quantum GX6000 Commercial Grade Fixed Mount VHF with NMEA2000 and Integrated AIS receiver

  2. The Standard Horizon SCU-31 is a NMEA 0183 Smart Antenna that provides rapid acquisition time and NMEA output.

    Can also be used as a replacement antenna for the older CP180 and CP300 chart plotters.

  3. Compact PMR446/dPMR446 Digital/FM Portable Radio (EU use)

  4. 27Mhz CB Antenna Omnidirectional

  5. The KS-21 is the perfect antenna for small boats and RIBs. With only 100 cm length it guarantees the same performance of a 150 cm length VHF antenna. It’s built with a 1,4 mm thick fiberglass whip that gets fully foam injected with the special Scout 100% waterproof technique, and it’s ice white colored with high gloss anti-UV filter to prevent color deterioration.

  6. The PA-3 is designed for deck or side mounting. It’s made of UV resistant reinforced nylon and allows the antenna to fold down in four ways with a quick release. 1” x 14 thread. Supplied with fitting set.

  7. USB programming cable for KG-UV920/950/980. Software not included.

      OUT OF STOCK  

  8. Desktop charger for ID31 and ID51

      OUT OF STOCK  

  9. C4FM/FM digital and analog dual band VHF/UHF transceiver, with 50W RF power output and a 66 channel high speed GPS. Equipped with high resolution 2-inch QVGA coloured display. Real Dual Band operations thanks to two independent receivers with simultaneous A and B band monitor function in C4FM. WiRES-X connectivity as Portable Digital Node and Fixed Node.

  10. The G15 PRO is the leading walkie talkie in the professional category. With a durable aluminium chassis and truly high-performance water protection, take it wherever you want and mistreat it too. You will always find it there, next to you, ready to help you in your endeavours.

      OUT OF STOCK  

  11. Automatic antenna tuner specifically designed for IC-705

  12. The MBF-705 is a purposely designed desk top holder for the IC-705. The MBF-705 can position the IC-705 at slightly upright position to make operation easier.

  13. The Alex loop is a small and lightweight portable Loop Antenna for 7 to 30MHz, ideally suited for radio amateurs with space restrictions or for your vacation and hiking trip. The ultra lightweight loop is assembled without any tools within seconds and can be tuned with the supplied tuner to a perfect match. The internal S-Meter of your radio helps in tuning this antenna.

      OUT OF STOCK  

  14. PMR446 portable midland programmable from PC, easy to use and intended for semi-professional use and hunting. IPX4 waterproof protection. 99 PMR446 channels programmable also from PC to adapt it to your operational needs. Quick access to the RRM channel (Montana Radio Network). CTCSS and DCS subaudio tones, monitor function, key beep, battery saving function, Vox. Backlit LCD display, Scrambler function. High-performance speaker for excellent audio quality. Socket for external microphones or micro-earphones with double Jack with Kenwood pitch. Supplied with 2600 mA rechargeable Li-ion battery and desktop charger.

    • Frequency range: 0.1 to 650 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
    • SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
    • R and X range: 0…2000, -2000…2000

  15. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
    A built-in ZOOM capability makes graphical measurements especially effective.
    An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

    • Frequency range: 0.1 to 1500 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
    • SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode
    • R and X range: 0…2000, -2000…2000

      OUT OF STOCK  

  16. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.

    A built-in ZOOM capability makes graphical measurements especially effective.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

Set Descending Direction