Website for deliveries in USA and Canada. Welcome!

Search results for 'v tac power supply 12v 78w 6 5a 10299 3800157628068'

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

  1. LDG control cable for Yaesu transceivers with "TX Req" input, suitable for various LDG tuners with 3.5mm stereo jack socket (radio). Tuning is done via the "Tune" button on the tuner, this signals the radio via "TX Req" to transmit a low power carrier. Red plug to the transceiver, black plug to the tuner.

  2. The Z-100PLUS is an automatic antenna tuner useable for 1.8 to 54 MHz, for any transceiver with 0.1 to 125 Watt power SSB/CW (100W FM, 30W on 6m). The tuner is suitable for any unsymmetrically fed antenna (i.e. Beams, Dipoles, Groundplanes etc.). If the matching range is not sufficient, a 4:1 balun (symmetrical) or a MTFT balun (unsymmetrical) can be used (not included).

  3. -19% Icom AH-730 Antenna Tuner 1.8-54 MHz Icom AH-730 Antenna Tuner 1.8-54 MHz
    HF/6 m automatic antenna tuner, especially for matching wire or vehicle antennas on short wave. Peak power 150 W, continuous power 100W. Suitable for all Icom radios with 4-pole tuner socket.

  4. Alpha HF Magnetic Loop Antenna
    Operating range: 7-30MHz
    Diameter: 26.5″
    Maximum applicable power: 20W
    Connector: PL-259
    It can be comfortably housed and carried with the LC-192 backpack

  5. The SX40C is a compact SWR-power meter. Featuring cross needle design for measuring SWR and output power simultaneously. Compact size makes it very useful for testing mobiles as well as base station installation.

    Special Features:
    • Cross needle design
    • Rated from 144-470 MHz
    • Power ranges of 30 & 300 Watts

  6. The SX20C is a compact SWR-power meter. Featuring cross needle design for measuring SWR and output power simultaneously. Compact size makes it very useful for testing mobiles as well as base station installation.

    Special Features:

    • Cross needle design
    • Rated from 3.5-30, 50-54, and 130-150 MHz
    • Power ranges of 30 & 300 Watts

      OUT OF STOCK  

  7. Reads SWR, forward and reflected power digitally in a single glance. 1.5-525 MHz, HF/VHF switch, 200 Watts.

  8. The SX400 measures forward and reflected power and VSWR. Compact size makes meter useful for testing both base and mobile installations. PL connections.

      OUT OF STOCK  

  9. The SX400 measures forward and reflected power and VSWR. Compact size makes meter useful for testing both base and mobile installations. N connections.

      OUT OF STOCK  

  10. The SX1100 measures forward and reflected power and VSWR. Compact size makes meter useful for testing both base and mobile installations. Two directional couplers with switch and LED indicators for in-line connection of two transceivers.

      OUT OF STOCK  

  11. TX Frequency: 144/430 RX frequency: 120/144/150/300/430/450/800/900 Gain: 2.15 dBi at 430 MHz Maximum power: 10 watts Height: 36 cm. Connector: SMA Male

  12. TX Frequency: 144/430
    RX frequency: 120/144/150/300/430/450/800/900
    Gain: -
    Maximum power: 10 watts
    Height: 21 cm.
    Connector: SMA Male

  13. 5/8 λ ground plane omnidirectional 26 to 28 MHz Tunable Antenna. Height (approx): 6700 mm / 21.98 ft.
    Additional nylon ring to reduce the wind noise of the radials included.

  14. There’s no need to introduce this classic of CB marine communication. This antenna has become a standard for professionals, thanks to an excellent quality and an outstanding reliability. The special paint with anti-UV filter avoids the deterioration of the colouring and keeps the whip shining white.

    The new vinyl plastic cap, navy blue, provides a quality, finished appearance to the antenna and it’s extremely resistant to high temperatures. 100% WATERPROOF

    • 100% WATERPROOF Antenna
    • Anti – UV high gloss finish
    • 5 m coaxial cable RG 58 CU MIL

  15. The KM-3F is an antenna designed specifically for sailing boats, and combines lightness and flexibility with extreme resistance to atmospheric agents. Sober and elegant design. The antenna is supplied together with the stainless steel mounting bracket, 20 meter RG-58cable and 2 PL connectors.

  16. The KM-3F is an antenna designed specifically for sailing boats, and combines lightness and flexibility with extreme resistance to atmospheric agents. Sober and elegant design. The antenna is supplied together with the stainless steel mounting bracket, which guarantees a quick and safe installation on the mast.

  17. Powerful VNA antenna analyzer up to 1GHz for embedded installation

  18. A very compact antenna for the 4m band. With the design with Moxon elements as radiators we achieve several benefits like for example the very short boom length, an excellent front/back ratio of more than 30 dB and a large bandwidth. An other benefit is the 50 Ω design, which let's u s avoid the use of a lossy balun as transforming element, the feed line is connected directly to the radiator. Only one feed line is required for both bands. The small weight of only 3 kg makes this antenna also suitable for vacations and DX-peditions. Packing size only 153 x 10 x 10cm.

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5