Website for deliveries in USA and Canada. Welcome!

Search results for 'rg 213 u coaxial cable 40022 100 n a'

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

  1. There’s no need to introduce this classic of CB marine communication. This antenna has become a standard for professionals, thanks to an excellent quality and an outstanding reliability. The special paint with anti-UV filter avoids the deterioration of the colouring and keeps the whip shining white.

    The new vinyl plastic cap, navy blue, provides a quality, finished appearance to the antenna and it’s extremely resistant to high temperatures. 100% WATERPROOF

    • 100% WATERPROOF Antenna
    • Anti – UV high gloss finish
    • 5 m coaxial cable RG 58 CU MIL

  2. 50cm coaxial cable with low attenuation (Low Loss, type H-155), with PL plug to PL plug. Useable up to 6 GHz, typical applications are ham radio, PMR and similar. Impedance: 50 Ohm

  3. The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible ZOOM capability.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

  4. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.

    A built-in ZOOM capability makes graphical measurements especially effective.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

  5. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
    A built-in ZOOM capability makes graphical measurements especially effective.
    An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

  6. Coaxial cable RG-213U MIL-C17 - 50 meters ring

  7. Coaxial cable RG-213U MIL-C17 - 25 meters ring

  8. Coaxial cable RG-58 - 50 meters ring. Diam: 5mm

  9. Coaxial cable RG-58 - 25 meters ring. Diam: 5mm

  10. Simple microphone with built-in speaker for Yaesu radios. PTT button on the side, a socket for an earphone is located at the bottom. Spiral cable approx. 40cm long, 2x 2-pin plug. Compatible with: FT-4VE, FT-4XE, FT-25, FT-65

  11. Speaker mike with curly cable - only PTT, 2 pin Midland plug

  12. Speaker mike with curly cable only PTT, 2 pin Midland plug

  13. Type-C USB port data cable

      OUT OF STOCK  

  14. Programming and data cable for Icom IC-7100/9700/ID-51/31/5100/4100. Also used to program your radios in terminal mode

  15. 6 meters separation cable for FTM-100, FTM-400D, FTM-400XD

  16. N Plug for cables of 10mm diameter (Airborne 10, Hyperflex 10, Ultraflex-10, Aircom Premium, Ecoflex-10, Ecoflex-10 Plus, Ecoflex-10 Plus Heatex, Seatex-10, RG-213/UBX)

  17. Controller Extension Cable 3.5m for IC-2730 and ID-5100

  18. LDG control cable for Yaesu transceivers with "TX Req" input, suitable for various LDG tuners with 3.5mm stereo jack socket (radio). Tuning is done via the "Tune" button on the tuner, this signals the radio via "TX Req" to transmit a low power carrier. Red plug to the transceiver, black plug to the tuner.

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5