Industries:

• Amateur radio
• Commercial radio
• Telecom
• Field Communication
• Marine

Use cases:

• Checking and adjusting antennas
• Measurement of various parameters of cables
  feedlines, filters, and other
• 1/4-λ, 1/2-λ coaxial stubs setup
•  Finding cable fault

Main features:

• 1000 MHz measures
• Factory calibration
• Сolor TFT display
• Pocket-size
• Splash and dustproof case
• User-friendly interface
• 16-hour runtime one charge
• Operation temperature from -20° to 55°C

Frequency range: 0.1 – 1000 MHz

Frequency input step: 1 kHz

Measurements for 12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450 and 600Ω systems

SWR measurement range: from 1 to 100 in digital mode, from 1 to 10 in graph modes

Range R and X: 0… 2000, -2000… 2000

Operating modes: Multé (a quick check of multiband antennas), HAM (a quick check of single band antenna), Single (measure SWR, |Z|, R, X, C, L, RL, Mag&Phase), TDR (distance to fault), SWR chart, Return Loss chart, RX Chart, OSL calibration mode, Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)

HF output: Connector type: N-type. Output signal shape: square, from 0.1 to 1000 MHz. Output power: -10 dBm (at a load of 50 Ohms).

Power: One Lithium-ion 18650 (included). Сharge time: 3 hours when using a charger. When the analyzer is connected to a PC or DC adapter with a USB connector, it receives power from these sources

Interface: TFT display, 220х220 pixels resolution. 2 × 3 keys on the waterproof keyboard. English (by default) and Japan menu and help screens. USB connection to a personal computer

Bluetooth: ver. 4.2 BLE Single-mode, Class B, via USB 2.0 Type-C

Dimensions: 185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)

Operating temperature: -20°- 55°C (-4°-131°F)

Weight: 185 grams (6.5 Oz) with battery


In the box:

• RigExpert Stick XPro antenna analyzer
  (with a Li-ion battery type 18650)
• Quick-start guide
• Neck strap
• USB cable
• N-type to UHF adapter