Website for deliveries in USA and Canada. Welcome!

Dewcaps and Heaters

ZWO Anti-dew heater strip

3 unit/s in stock

US$ 18.61

  IN STOCK  

Short Description

The anti-dew heater strip is used for anti-dew on the front window of the ASI cooled cameras.

Shipping

Add this product to cart to estimate your shipping costs.
Price without VAT. Shipping from European Union.

Any question about this product? Contact us!

Description

Details

This  kit includes the zip-tie, anti-dew heater strip , an Y power cord and two spacers:

The thickness of the anti-dew heater strip is 0.2~0.3mm.

The “Y” power cord is designed to connect in-line with the cooler power supply for convenience.

The thickness of the spacers is 0.3mm and 0.5mm. They are used for aligning the camera and EFW.

And we recommends 12V at 0.35A  DC adapter where the heating power on the strip is ~4.2 watts. You can use one and same power cord to power both the fan and heater simultanously, but make sure not to exceed recommended amount of Ampere.

How to use it?

  1. Tear out the protective film on adhesive tape
  2. Put the anti-dew heater strip on the front facing of the camera and make sure the black cable is in the right position (lining next to the DC plug at the rear end)
  3. Tie the black cable with a zip-tie o the camera body.
  4. Plug in the power cord, then everything is done.

Now you should be dew-free while shooting with the camera.

NOTICE: Be careful about welding portion, it is vulnerable can not holding very strong pull.

Additional Information

Additional Information

ManufacturerZWO
NameZWO Anti-dew heater strip
MPNZWO-ANTIDEW
EANN/A
Warranty2 Years

Reviews