ASI120MM Mini camera integrates AR0130CS 1/3″ sensor (4.8 mm x 3.6 mm). It is ZWO new mini camera. This camera has 1280 x 960 pixels. The pixel size is 3.75 μm x 3.75 μm. This camera provides 12bit ADC and its QE peak is almost 80%.

Guide achromatic refractor diameter 70mm, focal length 500mm (f / 7), eyepieces 31,8mm, complete with rings and 5 × 24 finder. Recommended 45mm standard dovetail bar CG5 / EQ5.

NOT INCLUDED: eyepiece, diagonal mirror and vixen bar.

Focal Reducer / corrector Evostar 0.85X ED72.

Requires M48 ring.

Skyguide 50ED DX - New version

• 50 mm apochromatic refractor with matched lens assembly with one ED element
• 242 mm focal length (f/4.8)
• 1.25” Helical focuser
• Finder stalk and dovetail mounting system included
• Parfocal ring provides for simple repeat placemente of guide cameras (guide camera not included)

• Most famous sensor of Sony
• APS-C(1.8″) Diagonal 28.4mm
• 16M Pixel (4944×3284)
• Very low read noise: 2.3e @24db gain 3.3e @lowest gain
• 14Bit ADC: provide real 14bit Dynamic range
• Electronic shutter: no vibration problem with mechanical shutter

0.85x Focal Reducer/Corrector for Sky-Watcher PRO 80 ED APO is designed for serious Astro-Imagers. Optimized for the Sky-Watcher PRO 80 ED APO, this superb quality accessory effectively reduces the telescope’s focal length by a factor of 0.85x and provides much improved field-edge correction. Features:

• 55mm back focus
• M48 threads (not standard T-thread)
• Drops ProED 80 from f/7.5 to f/6.3

The 2" CCD compressor reduces the focal length of telescopes with the factor 0.67x, thus allowing significantly shorter exposure times.

• ♦ The focal reducer is perfectly suitable for RC telescope. It also works good with Celestron EHD or Meade ACF telescopes or with refractors up to the focal ratio F/9
• ♦ The image field of DSLR cameras up to APS-C format is illuminated - full illumination up to 29 mm
• ♦ Easy connection to the telescope via 2" barrel
• ♦ Optimal working distance from the M48x0.75 thread to the camera sensor is 85 mm - enough space for accessories like off-axis guider or filter wheel
• ♦ 2" filter thread at the telescope side

Useful opening 250mm – Integrated intensity regulator - Digital voltmeter for perfect brigthness reproduction and thus reproducible exposures - 12 V DC connection perfect for field operation

Useful opening 250mm – Controlled by USB from PC - Digital voltmeter for perfect brigthness reproduction and thus reproducible exposures - 12 V DC connection perfect for field operation

Useful opening 550mm – Integrated intensity regulator - Digital voltmeter for perfect brigthness reproduction and thus reproducible exposures - 12 V DC connection perfect for field operation

Useful opening 550mm – Controlled by USB from PC - Digital voltmeter for perfect brigthness reproduction and thus reproducible exposures - 12 V DC connection perfect for field operation

Manual filter replacement within a few seconds whilst taking up minimal space - the light alternative to a filter wheel

• Telescope-sided connection: M48 female thread - M48x0,75
• Camera-sided connection: T2 male thread - M42x0,75
• Includes one holder for a 2" filter
• Thickness: only 16.45mm!
• Width: 66mm (diagonal is around 93mm)

Off-Axis Guider for Astrophotography

• The Celestron Universal T-Adapter connects a DSLR or SLR camera to a refractor for prime focus photography
• The adapter’s chrome barrel slides into any focuser that accepts 1.25” accessories
• T-Threads accept camera brand specific T-Ring (sold separately)

The TS Superflat GPU coma corrector is one of the best correctors for astrophotography through fast Newtonians.

• 4-element coma corrector for excellent imaging in the field and on the axis.
• Designed by Gyulai Pal in Hungary (GPU-Optics)
• Perfectly suitable for Newtonian telescopes with focal ratios of f/4 - provides very good results from f/3.5 to f/6.
• Very tolerant against tilting.
• Focal length is not changed.
• Camera connection through M48 thread.
• For better stability and accuracs, the corrector can be screwed to the focuser. Connection adapters for cameras and focusers are available.