Website for deliveries in Italy. Welcome!

Search results for 'midland kit 211 cb antenna kit211 n a'

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

  1. Antenna Analyzer with a frequency range from 0.1 to 3000 MHz. Perfect for amateur, professional, and commercial radio.

  2. Parabolic antenna for IC-905 and CX-10G. Splash plate feed antenna

  3. Collinear antenna 10GHz for IC-905 and/or CX-10G. Horizontal plane omnidirectional antenna

  4. Collinear antenna 5GHz for IC-905. Horizontal plane omnidirectional antenna

  5. Collinear antenna for IC-905. Horizontal plane omnidirectional antenna

  6. -19% Icom AH-730 Antenna Tuner 1.8-54 MHz Icom AH-730 Antenna Tuner 1.8-54 MHz
    HF/6 m automatic antenna tuner, especially for matching wire or vehicle antennas on short wave. Peak power 150 W, continuous power 100W. Suitable for all Icom radios with 4-pole tuner socket.

  7. Stick XPro is a vector antenna analyzer that simply and accurately measures all the main parameters of various RF devices and systems in the frequency range from 0.1 MHz to 1000 MHz.

  8. Stick Pro is an antenna and cable vector analyzer. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many others in the frequency range from 100 kHz to 600 MHz.

  9. Antenna Analyzer Stick 500 became the third member of the Stick family that is well known to connoisseurs of high technology and the incredible comfort of using. No matter the time, place, or weather. Range: from 0.1 to 500MHz

  10. The HEX6B is a shortwave beam for the six bands 20, 17, 15, 12, 10 and 6m. The design follows the ideas of G3TXQ who was the first ham radio operator to present this antenna. However the mechanical construction was refined by EAntenna with their long-standing experience of antenna engineering. The result is an efficient portable antenna for the classical DX bands, which can be used due to it's low weight also for DXpeditions and vacations.

  11. Antenna rotator for very heavy duty applications.

  12. Light duty antenna rotator.

  13. -9% RigExpert AA-2000 ZOOM 0.1-2000MHz Antenna Analyzer
    • Frequency range: 0.1 to 2000 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm systems
    • SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
    • R and X range: 0…2000, -2000…2000

  14. The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.

    It is the world’s first antenna analyzer capable of 16 hours of continuous measurements without battery recharging.

    Small, handy and powerful vector network analyzer is designed for measuring most useful parameters of cable and antenna systems in the range of 100 kHz to 230 MHz. Compared with the other devices the Stick is the State-of-the-Art Antenna & Cable Analyzer. Because it has Key benefits: less size you obtain, less weight you carry, less time you measure.

  15. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.

    A built-in ZOOM capability makes graphical measurements especially effective.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

    • Frequency range: 0.1 to 1500 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
    • SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode
    • R and X range: 0…2000, -2000…2000

      OUT OF STOCK  

  16. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
    A built-in ZOOM capability makes graphical measurements especially effective.
    An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

    • Frequency range: 0.1 to 650 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
    • SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
    • R and X range: 0…2000, -2000…2000

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5