Website for deliveries in Italy. Welcome!

Search results for 'nissei ns 520a vector impedance antenna analyzer vhf uhf ns 520a n a'

Maximum words count is 10. In your search query was cut next part: a.

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

  1. Vector Impedance Antenna Analyzer - 0.5/60MHz

      OUT OF STOCK  

  2. Stick XPro is a vector antenna analyzer that simply and accurately measures all the main parameters of various RF devices and systems in the frequency range from 0.1 MHz to 1000 MHz.

  3. Stick Pro is an antenna and cable vector analyzer. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many others in the frequency range from 100 kHz to 600 MHz.

  4. The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible ZOOM capability.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

  5. The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.

    It is the world’s first antenna analyzer capable of 16 hours of continuous measurements without battery recharging.

    Small, handy and powerful vector network analyzer is designed for measuring most useful parameters of cable and antenna systems in the range of 100 kHz to 230 MHz. Compared with the other devices the Stick is the State-of-the-Art Antenna & Cable Analyzer. Because it has Key benefits: less size you obtain, less weight you carry, less time you measure.

  6. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.

    A built-in ZOOM capability makes graphical measurements especially effective.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

  7. The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
    A built-in ZOOM capability makes graphical measurements especially effective.
    An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.

    The following tasks are easily accomplished by using this analyzer:

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable testing and fault location, measuring cable loss and characteristic impedance
    • Measuring capacitance or inductance of reactive loads

  8. Powerful VNA antenna analyzer up to 1GHz for embedded installation

  9. Antenna Analyzer with a frequency range from 0.1 to 3000 MHz. Perfect for amateur, professional, and commercial radio.

  10. Antenna Analyzer Stick 500 became the third member of the Stick family that is well known to connoisseurs of high technology and the incredible comfort of using. No matter the time, place, or weather. Range: from 0.1 to 500MHz

    • Frequency range: 0.1 to 2000 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm systems
    • SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
    • R and X range: 0…2000, -2000…2000

    • Frequency range: 0.1 to 1500 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
    • SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode
    • R and X range: 0…2000, -2000…2000

      OUT OF STOCK  

    • Frequency range: 0.1 to 650 MHz
    • Frequency entry: 1 kHz resolution
    • Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
    • SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
    • R and X range: 0…2000, -2000…2000

  11. 5/8 λ ground plane omnidirectional 26 to 28 MHz Tunable Antenna. Height (approx): 6700 mm / 21.98 ft.
    Additional nylon ring to reduce the wind noise of the radials included.

  12. There’s no need to introduce this classic of CB marine communication. This antenna has become a standard for professionals, thanks to an excellent quality and an outstanding reliability. The special paint with anti-UV filter avoids the deterioration of the colouring and keeps the whip shining white.

    The new vinyl plastic cap, navy blue, provides a quality, finished appearance to the antenna and it’s extremely resistant to high temperatures. 100% WATERPROOF

    • 100% WATERPROOF Antenna
    • Anti – UV high gloss finish
    • 5 m coaxial cable RG 58 CU MIL

  13. The KM-3F is an antenna designed specifically for sailing boats, and combines lightness and flexibility with extreme resistance to atmospheric agents. Sober and elegant design. The antenna is supplied together with the stainless steel mounting bracket, 20 meter RG-58cable and 2 PL connectors.

  14. The KM-3F is an antenna designed specifically for sailing boats, and combines lightness and flexibility with extreme resistance to atmospheric agents. Sober and elegant design. The antenna is supplied together with the stainless steel mounting bracket, which guarantees a quick and safe installation on the mast.

  15. Base antenna for 50MHz/VHF/UHF - 242cm.

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5