The cooled Color PRO camera from ZWO has the newest Sony IMX294CJK sensor - high-sensitivity astro camera for deep-sky photography.

ASI120MM Mini camera integrates AR0130CS 1/3″ sensor (4.8 mm x 3.6 mm). It is ZWO new mini camera. This camera has 1280 x 960 pixels. The pixel size is 3.75 μm x 3.75 μm. This camera provides 12bit ADC and its QE peak is almost 80%.

ASI224MC has a 1/3″ and 1.2M pixels sensor IMX224 with SONY Exmor and  NIR Technology.

Version: 1.3 (include Anti-amp glow function)

Extremely low read noise (0.75e – 1.5 e) and high sensitivity especially in IR range
Very suitable for astronomy and microscopy photograph

Guide achromatic refractor diameter 70mm, focal length 500mm (f / 7), eyepieces 31,8mm, complete with rings and 5 × 24 finder. Recommended 45mm standard dovetail bar CG5 / EQ5.

NOT INCLUDED: eyepiece, diagonal mirror and vixen bar.

Focal Reducer / corrector Evostar 0.85X ED72.

Requires M48 ring.

Skyguide 50ED DX - New version

• 50 mm apochromatic refractor with matched lens assembly with one ED element
• 242 mm focal length (f/4.8)
• 1.25” Helical focuser
• Finder stalk and dovetail mounting system included
• Parfocal ring provides for simple repeat placemente of guide cameras (guide camera not included)

• Most famous sensor of Sony
• APS-C(1.8″) Diagonal 28.4mm
• 16M Pixel (4944×3284)
• Very low read noise: 2.3e @24db gain 3.3e @lowest gain
• 14Bit ADC: provide real 14bit Dynamic range
• Electronic shutter: no vibration problem with mechanical shutter

0.85x Focal Reducer/Corrector for Sky-Watcher PRO 80 ED APO is designed for serious Astro-Imagers. Optimized for the Sky-Watcher PRO 80 ED APO, this superb quality accessory effectively reduces the telescope’s focal length by a factor of 0.85x and provides much improved field-edge correction. Features:

• 55mm back focus
• M48 threads (not standard T-thread)
• Drops ProED 80 from f/7.5 to f/6.3

The 2" CCD compressor reduces the focal length of telescopes with the factor 0.67x, thus allowing significantly shorter exposure times.

• ♦ The focal reducer is perfectly suitable for RC telescope. It also works good with Celestron EHD or Meade ACF telescopes or with refractors up to the focal ratio F/9
• ♦ The image field of DSLR cameras up to APS-C format is illuminated - full illumination up to 29 mm
• ♦ Easy connection to the telescope via 2" barrel
• ♦ Optimal working distance from the M48x0.75 thread to the camera sensor is 85 mm - enough space for accessories like off-axis guider or filter wheel
• ♦ 2" filter thread at the telescope side

ASI174MM is a new camera designed especially for Sun and Moon imaging.

Manual filter replacement within a few seconds whilst taking up minimal space - the light alternative to a filter wheel

• Telescope-sided connection: M48 female thread - M48x0,75
• Camera-sided connection: T2 male thread - M42x0,75
• Includes one holder for a 2" filter
• Thickness: only 16.45mm!
• Width: 66mm (diagonal is around 93mm)

2" Filter Holder for Artesky Filter Drawer

The IMX533 is a 1-inch, 9MP CMOS image sensor in a square format with a 3.76 um pixel size, capable of producing frames at 20 frames/sec in 14bit mode.
Read out noise is as low as 1.0e which makes it comparable to SCMOS or EMCCD sensors and highly suitable for high definition, low noise imaging.

Off-Axis Guider for Astrophotography

• The Celestron Universal T-Adapter connects a DSLR or SLR camera to a refractor for prime focus photography
• The adapter’s chrome barrel slides into any focuser that accepts 1.25” accessories
• T-Threads accept camera brand specific T-Ring (sold separately)

• Coma Corrector for Newton telescopes, that neither does reduce the focal length nor the image field of your telescope
• 46 mm clear lens diameter in M48 mode – enables exposures free from vignetting
• designed for fast f-ratios up to f / 3.5. Maximum sharpness across the entire image field
• Phantom Coating™ Group, multicoated for maximum transmission and total freedom from reflections
  
  
• Visual & Photographic Version consisting of:
  • 2" Multi-Purpose Coma Correktor (MPCC) Mark III photographic #2458400A
  • Baader Focusing Eyepiece Holder 1¼" / T-2 (T-2 part #08A) (#2458125)
  • Baader VariLock 29, lockable T-2 ExtensionTube 20-29mm with spanner tool (T-2 part #25Y) (#2956929)
  • Baader Hyperion 2" Finetuning Stopring with brass clamping ring & 2 thumb screws (#2958027)