Website for deliveries in USA and Canada. Welcome!

Search results for 'william optics handle for redcat'

Set Descending Direction
Page:
  1. 1
  2. 2

  1. The Bahtinov mask in astrophotography is very useful as it allows you to understand when the ideal focus for the instrument has been reached.

  2. The Bahtinov mask in astrophotography is very useful as it allows you to understand when the ideal focus for the instrument has been reached.

  3. The Bahtinov mask in astrophotography is very useful as it allows you to understand when the ideal focus for the instrument has been reached.

  4. The Bahtinov mask in astrophotography is very useful as it allows you to understand when the ideal focus for the instrument has been reached.

  5. Artesky 2" filter drawer - Only 16.45mm thick - The narrowest filter drawer ever! - Telescope side M48 - Camera side M48

      OUT OF STOCK  

  6. Ring M48x0.75 female M54x0.75 male - Length 5mm. Very useful adapter for QHY CMOS cameras (168,247,367,128,163)

  7. The guide telescope is extremely necessary when doing astrophotography, the UltraGuide MKII is a telescope with a focal length of 120mm for a ratio of F / 4.0, ideal for instruments with medium or short focal length. The 31.8mm focuser allows you to use the UltraGuide MKII both as a finder and as a guide telescope, in fact it is equipped with a T2 thread to allow attachment to most of the guide cameras on the market.

  8. Artesky is pleased to present the 50.8mm Twist Lock protaoculars for Skywatcher Newton telescopes, this accessory screws on the thread of the original focuser in Skywatcher Newton telescopes (150PDS, 200PDS, 250PDS, 300PDS, QUATTRO8S, QUATTRO10S, QUATTRO12S and similar that share the same focuser thread; allows you to use any accessory with a diameter of 50.8mm (2 ").

  9. SCT to M48 male adapter - 8mm length. Very useful for connecting M48 accessories to your Schmidt-Cassegrain instrument or to others with the same SC connection

  10. This corrector is optimized for the Artesky APO102EDF7 refractor, however it can also be adapted to other refractors up to focal lengths of F/7.5 by changing the backfocus distance. It returns excellent images even with very large sensors without issues; backfocus from the T2 thread is 55mm for the 102mm F/7.0 model. You can connect a 2" filter in front of the corrector.

  11. This corrector is optimized for the Artesky APO80EDF7 refractor, however it can also be adapted to other refractors up to focal lengths of F/7.5 by changing the backfocus distance. It returns excellent images even with very large sensors without issues; backfocus from the T2 thread is 55mm for the 80mm F/7.0 model. You can connect a 2" filter in front of the corrector.

  12. It is an ideal protection if you want to leave your telescope outdoors for a short time or store it in the cellar or garage. Simply put the cover on the mounted telescope and pull the fastening strap on the underside. So the lid can no longer fly off and is tightly closed.

  13. It is an ideal protection if you want to leave your telescope outdoors for a short time or store it in the cellar or garage. Simply put the cover on the mounted telescope and pull the fastening strap on the underside. So the lid can no longer fly off and is tightly closed.

  14. New column with compatible adaptor for iOptron, Skywatcher and AM5/AM3 ZWO mounts. Load capacity of 80Kg with a weight of only 8kg!

  15. Filters made with high quality craftsmanship and with metal cell for safe observation and photography of the sun. The filter is attached to the telescope, telescopic sight or telephoto lens using three metal screws with plastic tips. Filter opening 115mm. Adaptable for tubes from 110mm to 129mm

  16. M48 to 50.8mm adapter with M48 thread for 2" filters.
    This adapter is usually used to connect CCD or reflex cameras (equipped with M48 ring) to 2" focusers.

    You can also use this adapter to connect other products with M48 thread (M48x0.75) together

  17. Adapter M48 female M42 male - Thickness 5mm

    The M42x0.75 socket is equivalent to the T2 socket, the edges of this converter ring are knurled for easier tightening

    M48 to M42 conversion ring

  18. Mount your ball head or tilt head on the stable tripod of your mount and extend the range of application of your mount tripod.

    • Suitable for Vixen GP tripods
    • Suitable for Skywatcher EQ5 and H-EQ5 tripods
    • Suitable for TS-Optics DX tripod and Travel Tripod
    • Suitable for Berlebach tripods with GP or EQ5 style tripod head
    • 3/8" photo tripod thread on the top side, suitable for connecting ball heads and tilt heads
    • With cut-out for the azimuth adjustment of the tripods (azimuth pin)

Set Descending Direction
Page:
  1. 1
  2. 2