Icom AH-109PB Parabolic Antenna 10GHz
US$ 1,511.23Parabolic antenna for IC-905 and CX-10G. Splash plate feed antennaRigExpert AA-3000 ZOOM
US$ 1,279.97Antenna Analyzer with a frequency range from 0.1 to 3000 MHz. Perfect for amateur, professional, and commercial radio.RigExpert AA-2000 ZOOM 0.1-2000MHz Antenna Analyzer
Regular Price: US$ 1,066.49
US$ 977.54
- Frequency range: 0.1 to 2000 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm systems
- SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
- R and X range: 0…2000, -2000…2000
Yaesu G-2800DXC Antenna Rotor
US$ 888.59Antenna rotator for very heavy duty applications.- Frequency range: 0.1 to 1500 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
- SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode
- R and X range: 0…2000, -2000…2000
OUT OF STOCK
EAntenna HEX6B 6 Band Hexbeam
US$ 790.75The HEX6B is a shortwave beam for the six bands 20, 17, 15, 12, 10 and 6m. The design follows the ideas of G3TXQ who was the first ham radio operator to present this antenna. However the mechanical construction was refined by EAntenna with their long-standing experience of antenna engineering. The result is an efficient portable antenna for the classical DX bands, which can be used due to it's low weight also for DXpeditions and vacations.- Frequency range: 0.1 to 650 MHz
- Frequency entry: 1 kHz resolution
- Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems
- SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
- R and X range: 0…2000, -2000…2000
- Stick XPro is a vector antenna analyzer that simply and accurately measures all the main parameters of various RF devices and systems in the frequency range from 0.1 MHz to 1000 MHz.
Alexloop Magnetic Loop Portable 10-40m 20W
US$ 550.59The Alex loop is a small and lightweight portable Loop Antenna for 7 to 30MHz, ideally suited for radio amateurs with space restrictions or for your vacation and hiking trip. The ultra lightweight loop is assembled without any tools within seconds and can be tuned with the supplied tuner to a perfect match. The internal S-Meter of your radio helps in tuning this antenna.
OUT OF STOCK
Yaesu G-1000DXC Antenna Rotor
US$ 497.22Rotor for medium/heavy duty use, DXC version complete with interface card for connection to the radio, equipped with preset and rotation speed regulation.Icom AH-730 Antenna Tuner 1.8-54 MHz
Regular Price: US$ 523.91
US$ 426.07
HF/6 m automatic antenna tuner, especially for matching wire or vehicle antennas on short wave. Peak power 150 W, continuous power 100W. Suitable for all Icom radios with 4-pole tuner socket.RigExpert Stick Pro
US$ 390.48Stick Pro is an antenna and cable vector analyzer. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many others in the frequency range from 100 kHz to 600 MHz.The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
RigExpert Stick 500
US$ 354.90Antenna Analyzer Stick 500 became the third member of the Stick family that is well known to connoisseurs of high technology and the incredible comfort of using. No matter the time, place, or weather. Range: from 0.1 to 500MHz- Vector Impedance Antenna Analyzer - 0.5/60MHz
OUT OF STOCK
The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
Reads SWR, forward and reflected power digitally in a single glance. 1.5-525 MHz, HF/VHF switch, 200 Watts.